Power | As per requirement |
Type | Automatic |
Input Voltage | 100 V |
Cooling Type | Air Cooled |
Phase | Three Phase |
Frequency | 50 Hz |
Input Frequency | 45-55 Hz |
Duty Cycle | continuous |
Color | customised |
Operating Temperature | -15 deg C to 50 deg C |
Type | Semi-automatic |
Input Voltage | 480 V |
Output Voltage | 415 Volt |
Phase | Three Phase |
Power Source | Electric |
Input frequency | 45-55 Hz |
Current | 80 Amp |
Surge Protection | Without Surge Protection |
Phase | Three Phase |
Country of Origin | Made in India |
Input Frequency | 45-55 Hz |
Rating | 01 KVA -300 KVA Single phase / 03 KVA -3000 Kva Three Phase |
Response Time | 10 m.sec |
Our organization is delicately engaged in offering an excellent quality of Air Cool Servo Voltage Stabilizer that electronic system from power fluctuation, the offered single phase stabilizer is designed with advanced technology. Our single phase stabilizer is stringently checked in compliance with set industry norms. We offer this single phase stabilizer in different specifications in order to fulfill the needs of customers.
Specifications:
Rating | 01 KVA -300 KVA Single phase 03 KVA -3000 Kva Three Phase |
Input Voltage | Single phase (90 V-270 V , 140 V-280 V , 160 V-260 V ) Three phase (150 V-460 V , 250 V-460 V , 270 V-460 V ) |
Output Voltage | Single phase (220 V/230 V/240 V +/- 1% ) Three phase ( 380 V/400 V/415 V +/- 2% ) |
Wave Form Distortion | Nill |
Response Time | 10 m.sec |
Correction Method | Stepless correction using Variac |
Control Circuit | Fully automatic IC based solid state, glass epoxy control card for easy online serviceability |
Input Frequency | 45-55 Hz |
Cooling | Natural air /oil |
Efficiency | Better than 98% |
Duty Cycle | 100 % |
Operation | Auto / Manual |
No Load Loss | Less than 1% |
Suitability | Suitable for 3 phase unbalanced/balanced supply, unbalanced/balanced load |
Operating Temperature | -15 °c TO 50 °c |
Additional Facility | Step down / isolations |
Compatibility to | Specially designed control card for faithful |
DG Set | Operation on mains as well as DG set |
Control Panel | Power on indicator, low /high input indicator, auto/manual selector switch, push switches to adjust output voltage in manual mode, selector switch to monitor input/output voltage within 5 % of the set output voltage, volt meter to indicator output/input voltage |
Transformers & Variac | Are wound with electrolyte Grade Copper of 99.9 % purity Low loss CRGO lamination is used to Increased overall efficiency This reduces energy losses and hence saves electricity |
Earthing | Provided through two bolts 7 nuts |
High Voltage | Withstands 2.5 KV for power transformer |
Insulator | Better than 5 m ohms because of wound |
Resistance | Components being baked in the oven at 110 °c after vacuum impregnation |
*Your information is safe with us.
Capacity | 20 KVA |
Output Voltage | 440 V |
Input Voltage | 220 V |
Phase | Three Phase |
Frequency | 50/60 Hz |
Type | Semi-automatic |
Input Voltage | Single phase (90 v-270 v, 140 v-280 v, 160 v-260 v ) Three phase (150 v-460 v, 250 v-460 v, 270 v-4 |
Output Voltage | Single phase (220 v/230 v/240 v +/- 1% ) Three phase ( 380 v/400 v/415 v +/- 2% ) |
Material | Cast Iron |
Phase | Three Phase |
Country of Origin | Made in India |
Control Type | Relay controller |
Type | Automatic |
Input Voltage | 480 V |
Cooling Type | Oil cooled |
Material | Cast Iron |
Phase | Three Phase |